Crafting a Custom Skateboard: Step-by-Step Guide

If you're aiming for a personalised skateboard with every component just right, then a custom build is essential. In this brief video tutorial, Jonas demonstrates how to assemble a complete skateboard swiftly.

1. Begin by removing the foil, specifically the non-adhesive side
2. Next, apply the griptape to the deck, starting from one end and moving upwards
3. Rub the griptape with an Allen key or a screwdriver
4. Trim the excess griptape with a box knife, cutting from beneath at an approximately 45° angle
5. Sand the edges using the coarse side of the griptape leftovers
6. Create holes in the griptape with an Allen key or screwdriver for the bolts to pass through
7. Insert the bolts into these holes
8. Attach the trucks onto the four bolts
9. Secure the locking nuts and tighten them following a cross-pattern
10. Repeat the process for the second truck
11. Utilise the truck axle to fit the wheel bearings
12. Please remember to place speed rings at both the top and bottom
13. Tighten the locking nut, ensuring the wheel spins freely
14. Repeat for the remaining wheels

With all components in place, it's time to flaunt your skills! Ride on!!