Guide to Fitting a BMX Chain

Fitting a BMX chain can pose quite a challenge for any BMX enthusiast. If you're uncertain about the process, watch our video for guidance:

1. Begin by positioning the rear wheel and securing it manually.
2. Next, loop the chain over the back gears and the sprocket.
3. Select the overlapping chain link and utilise a chain breaker to divide the chain.
4. Reconnect the chain, once more using the chain breaker.
5. Then, loosely place the chain on the gears, and draw the wheel back until the chain is snug.
6. Finally, fasten the back wheel on both sides.

Your chain is now fitted!