Guide to Fitting EST Bindings

This instructional video demonstrates the process of fitting EST bindings to your snowboard. Burton EST bindings utilise the channel system, making them among the most prevalent snowboard binding systems used today:

1. Begin by ensuring you possess an EST binding. It ought to feature a channel insert.
2. Then, take off the rubber cover from the channel with the help of a flat screwdriver.
3. Place the EST mounting hardware into the channel.
4. Proceed to open your binding.
5. Remember, there is a recommended mounting position on the board.
6. Position your binding so that it aligns with the newly installed hardware.
7. Firmly press down on the channel insert to secure it within the channel.
8. Use the provided screws and begin attaching them to the board with a Phillips screwdriver, keeping them initially loose.
9. At this stage, the binding should move easily.
10. Adjust the binding by using the markers displayed on the board.
11. Finally, you may fully tighten the screws and restore the rubber cover.

Your bindings are now successfully fitted!