Guidance on Fitting Skateboard Bushings

Do you require assistance with fitting your skate bushings? You’re in the right spot. This video illustrates the installation process of skateboard bushings with just a few straightforward steps:

Tools required: skate tool.

1. Begin by sliding the larger bottom washer onto the bolt.
2. Subsequently, place the bottom barrel-shaped bushing onto the washer.
3. Position the hanger onto the bushing.
4. Place the cone-shaped bushing onto the bolt following that.
5. Subsequently, slide the smaller washer onto the bushing.
6. Manually screw on the lock nut.
7. Use a skate tool to tighten the lock nut.
8. Ensure the rubber portion of the nut grips the bolt securely.

Your bushings are successfully mounted!