Guide to Fitting Scooter Wheels

This video walks you through the various steps needed to install wheels onto a scooter setup:

1. Detach the rear axle by using two Allen keys.
2. Take your wheel and gently slide it into position.
3. Proceed to push the axle through both the deck and the wheel.
4. It's crucial to apply grease to your bolts every time!
5. Begin threading the bolt with your fingers, then secure it tightly with two Allen keys.
6. The wheel must be solid without lateral movement, yet should spin effortlessly.
7. Next, proceed to remove the front axle.
8. Place the wheel spacers into the fork and slide in the wheel.
9. Push the bolt through the fork and the wheel.
10. Insert the nut and commence tightening.

Your wheels are now firmly attached!